Author: franc

Installations made with single-core cables in steel pipes laid on the top or in the floor.

This method of laying wires is used in conditions, in which the cables could be mechanically damaged, in ordinary rooms, temporarily humid and not heated, niebezpiecznych pod względem pożarowym …

Installations made with single-core cables in plastic pipes laid on top, in regular or hermetic execution.
Clamps with flexible arms for pipes are attached to the base with steel pins shot or hammered into the wall, plastic dowels, za …

Installations made with bare or single-core insulated conductors on insulating supports.
Cable routes and places for connectors, plug sockets, fixtures etc.. is designated, however, you should keep approx. 80 cm distance between knobs or rollers.

Gałki i rolki porcelanowe należy osadzać …

Electric lighting fixtures are used to fix the light source, supply of electricity to it, appropriate shaping of the luminous flux and to protect the light source against external influences. The main components of the luminaires are diffusers and reflectors. The lampshades provide a mechanical cover for the light source, a …

MERCURY-CUBE LAMPS

The light of an ordinary mercury lamp is almost devoid of red rays, while incandescent lamp light has some excess. Therefore, lamps began to be used to improve the color of the light emitted by mercury lamps, w których oprócz jarznika z parą rtęci zastosowano …

SODIUM LAMPS

High pressure sodium lamps are discharge lamps, in which the light source is an arc tube containing sodium metal and neon gas as the ignition medium. Under the influence of heat, caused by discharges in neon, sód zamienia się w parę i przejmuje …

METALHALIDE LAMPS

High-pressure metal halide lamps constitute an important group among discharge lamps. These lamps are characterized by high luminous efficiency. They are used to illuminate factory halls, industrial sites, sports facilities, department stores. The ratings of metal halide lamps are given in the table.

Board. Dane znamionowe …

Mercury lamps are used for outdoor lighting and large rooms, e.g. factory halls, exhibition etc.. They are discharge lamps, where there is a discharge in mercury vapor at high pressure. Dzięki temu słup wyładowczy w jarzniku sam jest źródłem promieniowania widzialnego …

Fluorescent lamps called fluorescent lamps are out, next to the light bulbs, the most commonly used light sources. In fluorescent lamps, due to the current flow between the electrodes built into the ends of the glass tube filled with argon and mercury vapor, there is a length of ultraviolet radiation 254 nm. Promieniowanie widzialne uzyskuje …

Bulbs known from 1879 r. they are the most widely used source of light and despite a relatively low luminous efficiency, in many cases they are still irreplaceable sources. The advantages of incandescent lamps are: large variation in their power (from a part of a watt to a few kilowatts) oraz możliwości stosowania różnych …