Fixing the base of the batten with screws and expansion plugs; 1 - batten cover, 2 - base of the slat, 3 - screw with a countersunk head, 4 - spherical head screw, 5 - expansion plug.
Installations made with wires in strips or wall channels.
After determining the route of the installation, cut the base of the slats to the appropriate length. After routing, drill holes in the base of the slats and on the walls. The holes should be drilled at a distance of no more than 30 mm at both ends of the slat and a maximum of 600 mm along the bases. Skirting boards and walls should be fastened with screws with expansion bolts. It is allowed to glue the base of the strip to the base. After attaching the bases, the covers of the slats are cut to the appropriate lengths, taking into account the course of the installation, branches, connections with installation accessories (sockets, junction boxes etc.). After arranging the wires inside the terminal block covers are installed.
Snap the cover into the base of the wall board.
The wall strips enable the lead of the cables to the sockets fixed with surface-mounted boxes with the use of a connector (Lynx. a) or not (Lynx. b). In a similar way, the installation is carried out with the use of wall-mounted installation channels- or multi-partition.
Installation of surface-mounted boxes to wall strips: a) with the use of a connector, b) without a hyphen; 1 - can, 2 - board, 3 - straight connector, 4 - feeling.